Official Site of EPSCO L. L. C. | 2005
 
Home
About EPSCO
Services
Memberships
EPSCO News
Contact
Photo Gallery
HSE Training
 

 

       
Kitchen and Laundry Duct Cleaning

Many kitchen fires are spread due to dirty exhaust ducts and can cause serious damage not only in the kitchen but building resulting in an injury or loss of life. Similarly, laundry ducts, if left unclean can be a serious fire hazard. Lint and dry flammable dust get accumulated in the laundry ducts. To avoid the risk of fire, kitchen and laundry ducts should be cleaned regularly by a professional certified company.
   
Kitchen Duct Before Cleaning Kitchen Duct After Cleaning
 
Method of Cleaning Kitchen Ducts
We use several safe methods for cleaning, one of which is a rotating brush and high-pressure steam nozzle. The other method involves a technician descending in the ducts depending upon the size of the duct to manually clean the duct. It has been our experience that most duct systems have little or no access and our procedure includes installing access panels or access doors to gain access
Laundry Duct Before Cleaning Laundry Duct After Cleaning
 
Grease Traps
Area used to collect grease, food particles, oil and accumulated grease from commercial kitchens to prevent blockages and to comply with discharge regulations. We clean grease traps and the pipelines to the drains inlet points using high pressure water jetting equipment.
 
Drains & Sewers
Pipelines and drains can be cleaned in an environmental friendly way. We use water instead of chemicals that can cause damage to the environment.  

 

Advantages of Hydro blasting
No additional structural damage.
Rebar is exposed, cleaned and left undamaged
Eliminates dust
Less Noise Pollution
Saves time in demolition
 
 
 

Drain Cleaning using water jetting

Water Jetting
High pressure water jetting technology is used to remove heavy debris from the internal surfaces of pipelines or tube bundles. We offer services to clear obstructions in Kitchen pipes, bathrooms, laundry, septic tanks, toilets and grease traps. Video inspection of the pipelines is also done whenever required.
Tube Bundle Cleaning
Hydro blasting
We provide state of the art technology for the removal of deteriorated concrete - Hydro Demolition. Our staff are trained to operate high pressure plunger pumps for operating pressure up to 2800 bar, motor rating up to 1500 kw.
  Cold Cutting
Is a process of using high pressure water and entrained abrasive to cut steel while causing no risk of explosion. The process is used for tanks and pipes where risks of explosion exist for example fuel, chemicals gas tanks and pipelines.
Cold Cutting
 
                             
epscodxb.com

Home | About EPSCO| Services | Photo Gallery | HSE Training

©2002 EPSCO, All Rights Reserved